Packaging
Astro Pak Corporation has a variety of clean rooms ranging from ISO class 4 (class 100 to class 1000). Astro Pak cleans using several different methods including hand detailing, ultrasonic, passivation, high pressure spray, and high temperature bake out. To validate our cleaning, we perform analytical testing such as non volatile residue (NVR), and particulate testing with custom packaging.
Custom Packaging
Astro Pak can accommodate any of your packaging requirements, from aerospace, semiconductor, medical, to laser components. We fabricate custom bags as necessary to fit the components we are cleaning. Typical sizes range from 1"x 1" square bags to 20'x 20'square bags or bigger. Components are also wrapped with bubble pack for further protection.
Types of Systems Serviced
Laser Components
Aerospace Components
Semiconductor
High Purity Gas Systems
Medical Industry
Instrument Tubing
Food Handling Equipment
Beverage Handling Equipment
Pumps, Valves, Gauges
Employee Qualifications and Training
Astro Pak technicians receive training in clean room protocol and clean assembly before they can enter the clean room or perform work on precision components. Furthermore, our technicians are continuously receiving training and they must also meet Astro Pak recertification requirements every year. Finally, our technicians are continually monitored for proper clean room protocol and correct cleaning or assembly techniques.
Applicable Standards/ Approvals
Provided is a partial list of specifications Astro Pak is approved to clean and assemble to:
|
Boeing Lockheed Martin Raytheon Northrop Grumman NASA IEST -STD-CC-1246D National Ignition Facility (NIF) |
MAO110-301 Level 100A 7-75192-1 through 6 HP 10-37 K-143 KSC-C-123 CGA 4.9 MEL Standards |
Astro Pak Procedures
Astro Pak develops procedures by conducting meetings with customers to discuss their cleaning requirements for their components. Protocol such as cleaning components method(s), chemical selection, acceptable test level standards and test performance techniques are all identified at that time. Further, if assembly is required then assembly drawings are reviewed as well. Once the details have been discussed, Astro Pak will write a procedure and submit it for the customer's approval. When the procedure is approved, Astro Pak technicians will perform the work by following the detailed procedures that insure proper cleaning protocol and assembly.
Quality Assurance
Our clean rooms are tested to insure that the cleanliness level is maintained and the clean room is completely cleaned.
The 18 meg ohm deionised water is continually monitored and is of the highest quality and purity.
Astro Pak's preventive maintenance program insures that all filters are changed and equipment calibrations are completed as required and scheduled.
Success Stories
Astro Pak Corporation was named the Department of Energy's Small Business of the
Year for 2002. Additionally, Astro Pak Corporation is designated as a Key Supplier and has received an "A" grade from Lawrence Livermore National Laboratory.
Astro Pak has over 45 years of experience world wide in cleaning to numerous specifications. We are an approved supplier to perform precision cleaning for Boeing, Lockheed Martin, Raytheon, NASA, Stanley Aviation, Aerojet, Rocketdyne, BAE Systems, Air Liquide, Allied Signal Aerospace, TRW, Pratt & Whitney, (USA) United Aerospace Alliance, MSS Stennis Space Center, and Lawrence Livermore Laboratory (NIF).
Astro Pak welcomes the opportunity to meet with you to perform your cleaning or assembly requirements.
